Duckbill valve made of neoprene and equipped with instructions to easily attach it to the pants of your spearfishing wetsuit.
When you spend many hours in the water you need to urinate and with this neoprene valve you can do it in the most hygienic way possible without having to get out of the water and take off your suit.
This valve can be adapted to any trousers, both lined and smooth, both new and used. The dimensions are 2 Standard and Large, but what is most important for the seal is the size of the circular hole to be made in the trousers and above all the good workmanship without burrs or steps. It is very important to carefully follow the instructions for the application, because especially the first time you could make mistakes and compromise comfort and correct operation.
USES & ADVANTAGES
With LIQUIDOUT at the end of the dive the wetsuit and our body do not have bad smells.
During the dive you do not have the unpleasant feeling of dirt on you.
The lack of excess liquid inside the suit also allows you to stay warmer during the entire dive.
The temporary sensation of heat when hot urine is emitted into the suit soon turns into liquid that cools and consequently the body must heat up. Therefore at the initial warm sensation then the cold one appears.
From tests carried out it has been established that with LIQUIDOUT you gain up to 20% of heat.
You can assemble it yourself - following the instructions or have it applied by the trusted shopkeeper who provides this service.
The most controversial advantage will be to discover that until the moment you don't use it, it seems a useless and sometimes ridiculous object, but after the first time you use it, you will discover a new world and can no longer do without it.
List of the necessary: 1 tube of good neoprene glue (the Omer 5220 model is recommended, tube of 50 grams of soft glue with high adhesive action.
1 LIQUIDOUT valve to be applied to the trousers.
1 Marker to mark the trace on the trousers
FINDING THE POINT: 2 methods can be used. The first is to wear trousers and mark the exact spot. The second is to measure from the under crotch of the trousers (central point under the trousers) from 10 to 13 cm according to the size of our pelvis. Generally the most used size is 12 Cm.
TRACE THE DRAWING using the supplied template paper, marking the central hole and the external perimeter.
CUT THE HOLE with good scissors. The small circle to be cut is as big as a 1 € uro coin (better that it is a little less than a little more). Curved nail scissors are recommended. It is not essential that the cut is perfect like a die, but obviously it is better if precise and free of steps because it is precisely this hole that will make the main seal.
APPLY THE NEOPRENE GLUE respecting the external perimeter drawn and keeping 2 cm from the internal perimeter around the small circle. The lack of glue around the small circle is essential to not compromise the elasticity of the hole. In any case, the seal is more than sufficient using the glue as indicated. Then spread a coat of glue on the internal perimeter of the LIQUIDOUT only for the part that will then match the glue on the trousers. WAIT 20 minutes before applying a second coat of glue evenly distributed over the one previously applied both on the trousers and on the LIQUIDOUT. After another 20 minutes of waiting, it's time for bonding. Avoid wet areas for work.
POSITION THE LIQUIDOUT over the trousers trying to match the perimeter drawn in the trousers to that of the LIQUIDOUT. ATTENTION it is very important that the hole on the trousers and that of the LIQUIDOUT match. (you can use a handle of a screwdriver or something similar to match the hole of the trousers with that of the LIQUIDOUT). The duck beak of the LIQUIDOUT must be positioned horizontally. If the positioning is not correct, the two parts can be immediately detached. In this case, a new coat of neoprene glue will be needed on both sides and wait another 30 minutes.
ONCE IN POSITION, press the two glued parts and then with the help of a hammer beat the glued surface. This is to increase the adhesion between the two sides. At this point it is left to dry for at least 12 hours before using the trousers in water.
INSTRUCTIONS FOR USE IN WATER:
You put on the trousers and then lubricate the hole of the LIQUIDOUT and proceed with the insertion that will be easy. The excess outer part of the duck's beak is folded and everything is stored under the beaver's tail of the jacket itself to eliminate any risk of small infiltrations. When urinating, the beaver tail is raised and the LIQUIDOUT is placed on its side, then it is put back in place.
Availability: Most of our items are in our store.On our website,you will find information about the availability of the article.If the item is not available,we will inform you about the expected delivery terms.Addiontally you will have the option to be notified when the item is back in stock.
Pagamento: Potrai effettuare il pagamento dell'ordine mediante carta di credito, paypal o bonifico bancario. In caso di bonifico bancario, riceverai una e-mail con le coordinate bancarie di PMS. Una volta effettuato il pagamento, procederemo alla spedizione dell'ordine.
sSpese di spedizione: Shipping costs are free for orders over 49€.Ordinary shipments have a cost of 8€.The shipping cost is in any case calculated on the basis of the items in the cart and clearly visible.
Reso facile: You have up to 14 days to return your order.You can manage the return from the "My account" section.Shipping is the responsibility of the user.Click here for more information
Cambio taglia: Size changes can be managed from the"My account" section.Shipping is the responsibility of the user.If the new size is not available Pms will help you find an alternative.Click here for more detailed information.
Omer Neoprene Liquid Out Valve It's the perfect item to complete your outfit Spearfishing. In our online store PLANET MULTI STORE you can take advantage of the multitude of items available and if you immediately send your order to PLANET MULTI STORE, you will receive it in a few days at home. Furthermore, in our online shop PLANET MULTI STORE you can find other products Accessories and Spare Parts To complete Omer Neoprene Liquid Out Valve.
*Tutti i marchi commerciali e i loghi appartengono ai rispettivi proprietari. All trademarks and logos belong to their respective owners.
And obtain 5 € of discount on your first order.