New Apeks xtx 200 regulator with cap and 1 stage with an attractive design.
It represents the top of the range of the XTX Apeks family, much appreciated by purists for more technical diving.
The first stage is diaphragm and this guarantees high performance and high reliability at any depth and pressure of the cylinders.
The small internal components reduce friction and are protected from the external environment.
Air is one of the best thermal insulators. The Dry Chamber system, adopted on Apeks regulators approved for use in cold waters, is based on this factor and ensures the best possible thermal protection. The mechanism of the regulator is totally isolated from the external environment and maintains its efficiency unchanged over time. It guarantees high performance and high reliability at any depth and pressure of the cylinders.
In the balanced second stages, the air arriving from the first stage at pressure MP counteracts the opening of the valve. The effort of delivery is considerably reduced, with the result of a second stage much more reactive to the inhalation act, soft and sensitive, especially in depth.
Both second stages are reversible, they can be quickly transformed from right to left. An absolutely matchless combination of quality and performance!
Sensitivity can be adjusted underwater using the external handwheel. When swimming on the surface, the handwheel can be screwed on to reduce sensitivity, while at depth the handwheel can be completely unscrewed to compensate for the increase in
inhaled air density.
The higher the sensitivity, the lower the initial effort of breathing.
The external regulation control of the Venturi Effect optimizes air injection. The result is the ease of breathing and the impediment of spontaneous delivery phenomena. Available on all Apeks second stages.
In a traditional first stage, the increase in intermediate pressure (MP) is equal to the increase in ambient pressure (blue line). When using first stages with an overpressure effect of the intermediate pressure, there is an increase in MP (red line) higher than that of the ambient pressure. This increase compensates for the greater respiratory effort required by the increase in density of the air breathed in depth.
Maximum limit in CE standards EN 250: 3.00 J / It
Apeks regulators are tested on ANSTI machines to simulate breathing while diving.
The equipment measures the inspiratory and expiratory efforts separately as the depth, supply pressure and pressure vary
water temperature. The results of the tests are processed to evaluate the total work of the respiratory cycle (Work of Breathing).
- satin chrome finish
- 4 3/8 "UNF MP outputs
- 2 7/16 "UNF HP outputs
- all the Mp outputs allow to configure the dispenser from right to left
- dry chamber apeks system
- overpressure effect of intermediate pressure
- convertible from right to left
- easily removable discharge conveyor
- heat exchanger
- notch adjustment of the venturi effect
- sensitivity adjustment
-with heat exchanger
- ideal for cold water diving
-Convertible from right to left
- 2-stage pneumatic balancing
-Adjustable venturi support
-Yellow vending machine lid
-Yellow Miflex - low pressure hose 90 cm
-High quality mouthpiece
- sensational respiratory comfort
- very high quality regulator
|Use Type||Cold Water|
|Low Pressure Ports||4 LP|
|High Pressure Ports||2 HP|
|Dive Type||Technical/Ricreative Dive|
|Regulator Composition||1 + 2 Stage + Octopus|
Availability: Most of our items are in our store.On our website,you will find information about the availability of the article.If the item is not available,we will inform you about the expected delivery terms.Addiontally you will have the option to be notified when the item is back in stock.
Pagamento: Potrai effettuare il pagamento dell'ordine mediante carta di credito, paypal o bonifico bancario. In caso di bonifico bancario, riceverai una e-mail con le coordinate bancarie di PMS. Una volta effettuato il pagamento, procederemo alla spedizione dell'ordine.
sSpese di spedizione: Shipping costs are free for orders over 49€.Ordinary shipments have a cost of 8€.The shipping cost is in any case calculated on the basis of the items in the cart and clearly visible.
Reso facile: You have up to 14 days to return your order.You can manage the return from the "My account" section.Shipping is the responsibility of the user.Click here for more information
Cambio taglia: Size changes can be managed from the"My account" section.Shipping is the responsibility of the user.If the new size is not available Pms will help you find an alternative.Click here for more detailed information.
Apeks Xtx 200 + Octopus Xtx 40 It's the perfect item to complete your outfit Diving. In our online store PLANET MULTI STORE you can take advantage of the multitude of items available and if you immediately send your order to PLANET MULTI STORE, you will receive it in a few days at home. Furthermore, in our online shop PLANET MULTI STORE you can find other products Regulator Sets To complete Apeks Xtx 200 + Octopus Xtx 40.
*Tutti i marchi commerciali e i loghi appartengono ai rispettivi proprietari. All trademarks and logos belong to their respective owners.
And obtain 5 € of discount on your first order.